Ąžuolas EBM-36
Model:
EBM-36
Warranty:
12 months
from
16 500 €
incl. tax
Product information
Control panel on the infeed side
The machine frame made of strong structural steel with reinforcements ensures the stability of the working units
Infeed conveyor made of pads covered with wear-resistant rubber, fixed on an industrial chain
The conveyor moves on two steel cylindrical guides (made of hardened and tempered steel), one round and the other flat, which ensure uniform smooth feed and resistance to lateral load
The upper pressure beam is made of thick steel, mounted on two columns with two rows of rubber-coated pressure rollers
Frequency inverter
Centralized chip extraction system
Pull-out workpiece support along the entire length of the machine
Protective covers in the edge feeding and working unit zones
Lockable main switch and motor overload protection
Ąžuolas EBM-36 automatic edge banding machine. All the best features you expect from edge banding machines. Suitable for both large and small production volumes.
Performed operations: panel edge milling, edge banding, cutting the edge banding from the roll, precise milling of the applied edge banding, scraping the edge banding with a “scraper,” and edge polishing.
Technical specification
Panel length
Min. 150mm.
Panel width
Min. 60 mm.
Panel thickness
10-60 mm
Edge band width
12-65 mm
Workpiece size
Min. 300×60, 150×150
Edge thickness
0.4-3 mm
Feed speed
12-20 m/min
Machine power
10 Kw
Pressure
0.6 bar
Controller
Delta
Control
Touchscreen
Voltage
3PH 400V 50HZ
Machine dimensions (L × W × H)
3450×860×1550 mm
Weight
1200 kg.
Warranty
12 months